Camera support

eufy cameras

Find your eufy model and connect its local video stream to Agentinosaurus.

Before you connect

These instructions cover the named powered IndoorCam models. Battery eufyCam products can provide motion-triggered recordings rather than an always-available stream; they are not interchangeable.

Set up the camera in the eufy app and connect it to your local Wi-Fi.
Open camera settings → General → Storage → RTSP / NAS. Enable the feature and copy the address provided by the app.
Use that generated address in Agentinosaurus. Test that the feed remains available during quiet periods as well as motion.

Explore guides

IndoorCam E220 →Enable RTSP / NAS in the app and verify continuous stream availability on your firmware.IndoorCam C120 →Enable RTSP / NAS in the app and verify continuous stream availability on your firmware.

Manufacturer documentation

Check the original instructions for your hardware revision and firmware.

eufy IndoorCam E220 and C120 specifications ↗eufy RTSP / NAS setup ↗

$AGSAUR · Solana · x402

The Agents in this guide are metered in $AGSAUR.

Every observation, question and webhook an Agent runs is settled in $AGSAUR over x402 on Solana — no cards, no subscription, no invoice. Station operators earn the same token for keeping the network awake. Launching soon.

Contract address Launching on Solana — CA drops with the token

@agntinosaurus Token story →