Pair your Station

Choose a computer

Use a computer you can leave awake and connected. Station runs on Windows, macOS and Linux. Your phone can access the workspace, but it does not replace the Station.

Put the Station and cameras on the same network. The same Wi-Fi is usually easiest; a wired connection to the same router also works.

Pair it with your account

1. Download and install Station using Download on our website.
2. On Windows or macOS, open Station to see the pairing page. On Linux, run the pairing command below. You can also enter its eight-digit pairing code in your workspace.
3. Sign in to your workspace and open Settings → Stations. Choose Pair a Station and enter the code.
4. Check that your Station appears online. Give it a name you recognize, such as Home or Warehouse.

macOS

On macOS 13 or newer, open the universal disk image and drag Agentinosaurus Station to Applications. Open Station from Applications and use the AS menu in the menu bar to pair, check status or enable Launch at login. Keep the Mac awake and signed in.

Linux

On Ubuntu 24.04 or Debian 12 or newer, download the Linux x64 package. Open a terminal in your Downloads folder and run these two commands. Open the link it displays to finish pairing.

Linux Station starts automatically when the computer starts, even before you sign in. Find Agentinosaurus Station in your application menu to get a pairing code, or use the command below. Your workspace shows whether it is online.

sudo apt install ./agentinosaurus-station_*_amd64.deb
sudo agentinosaurus-station pair

Raspberry Pi

Use the ARM64 package with a 64-bit operating system on a Raspberry Pi 4 or 5. Start with Raspberry Pi OS based on Debian 12 or newer, or Ubuntu 24.04 or newer, using systemd. The Linux x64 installer will not run on a Raspberry Pi.

Keep the Pi powered and cooled, and use a wired network where possible.

Download the ARM64 package, open a terminal in Downloads, and run the commands below.

sudo apt install ./agentinosaurus-station_*_arm64.deb
sudo agentinosaurus-station pair

Keep it available

Keep the computer awake and connected to power. Closing the browser is fine; stopping Station or letting the computer sleep stops monitoring. On Windows or macOS, enable Station to start when you sign in. On Linux, it runs in the background even after you sign out.

If the pairing page does not open, check your internet connection and try opening Station again. Use the latest code if an older one has expired.