Skip to guide
AgentinosaurusLearn
$AGSAUROpen workspace
Browse guides
← Supported cameras

Camera support

Reolink cameras

Find your Reolink model and connect its local video stream to Agentinosaurus.

Before you connect

Use Preview_01_sub for the lower-resolution stream. For an NVR, the channel number must match the camera you want.

Camera firmware and hardware revision matter. Check the manufacturer’s compatibility table before choosing a hub or a recording setup.

  1. Finish setup in the Reolink app or Client and find the camera’s local IP address.
  2. In Reolink Client, open Device Settings → Network → Advanced → Server Settings. Enable RTSP. Enable ONVIF if you want to try automatic discovery.
  3. For cameras connected through a Home Hub or NVR, enable the services on that device and use its address and channel instead.

Explore guides

RLC-510WA →Local stream setup and troubleshootingRLC-811A →Local stream setup and troubleshooting823S1 →Local stream setup and troubleshootingP430 →Local stream setup and troubleshootingW320 →Local stream setup and troubleshootingP840 →Local stream setup and troubleshootingE1 Outdoor →Local stream setup and troubleshootingE1 Outdoor Pro →Local stream setup and troubleshootingE1 Outdoor PoE →Local stream setup and troubleshootingDuo 2 PoE →Local stream setup and troubleshootingDuo 2 WiFi →Local stream setup and troubleshootingDuo 2V PoE →Local stream setup and troubleshootingVideo Doorbell PoE →Local stream setup and troubleshootingVideo Doorbell WiFi →Local stream setup and troubleshootingE1 Pro →Local stream setup and troubleshootingE330 →Local stream setup and troubleshootingE1 →Requires a compatible Reolink Home Hub or NVR for RTSP. The camera’s own address is not a standalone RTSP source.E320 →Use a compatible Reolink Home Hub or NVR; standalone RTSP is not documented for this model.Argus PT Ultra →Requires a compatible Home Hub. Battery wake and streaming limits need checking; do not assume an uninterrupted 24/7 stream.Argus 3 Ultra →Requires a compatible Home Hub. Confirm the camera remains available for your monitoring schedule; battery operation can limit continuous access.

Manufacturer documentation

Check the original instructions for your hardware revision and firmware.

Reolink RTSP and ONVIF compatibility table ↗Enable Reolink server ports ↗Reolink RTSP addresses ↗

$AGSAUR · Solana · x402

The Agents in this guide are metered in $AGSAUR.

Every observation, question and webhook an Agent runs is settled in $AGSAUR over x402 on Solana — no cards, no subscription, no invoice. Station operators earn the same token for keeping the network awake. Launching soon.

Contract address Launching on Solana — CA drops with the token
@agntinosaurus Token story →